Color: black Material: ABS Size: 12*10*7.2cm/4.72*3.94*2.83in Line length: about 110cm/43.31in Weight:320g
Notes: Please pay attention to the power of your car's cigarette lighter before buying. *12V/120W :Suitable for vehicles with 1 battery, such as cars/off-road vehicles, etc.This product only supports cars with the original cigarette lighter greater than 120W. *24v/200w :Suitable for vehicles with two batteries, such as large trucks, trucks, etc.,Supports the original cigarette lighter with a power greater than 200w before it can be used. Some models of cigarettelighters have no current limiting device and cannot drive the heater, or there is no heating or intermittent heating.
The power of the hot air blower is 200W for 24V and 120W for 12V. The current limiting device in the cigarette lighter of some models cannot carry high-power electrical appliances. The specific manifestation is that the power light will go out after a few seconds of plugging in and power cannot be supplied. This is not a product quality problem. For trucks in limited-flow models, check the logo on the cigarette lighter port. If the power is greater than 200W, it can be used. If it is marked 24V?A, multiply the two and the result is greater than 200. It can be used. If there is no mark, the flow is limited. Solution: ①Go to a 4S store or find an electrician to modify the cigarette lighter wire and directly connect it to the cigarette lighter, bypassing the current limiting device. ② Use direct connection wire, lead the wire from the battery, and connect the two wires for normal use.
